Cisco 7961G Datasheet

© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 6 of 8
POWER CORDS
Table 6 lists the AC country power cords needed for the Cisco Unified IP Phone 7961G.
Table 6. AC Country Power Cords
Part Number Description
CP-PWR-CORD-AP=
Asia Pacific
CP-PWR-CORD-AR=
Argentina
CP-PWR-CORD-AU=
Australia
CP-PWR-CORD-CE=
European Community
CP-PWR-CORD-CN=
China
CP-PWR-CORD-JP=
Japan
CP-PWR-CORD-NA=
North America
CP-PWR-CORD-SW=
Switzerland
CP-PWR-CORD-UK=
United Kingdom
ACCESSORIES
Table 7 lists optional accessories available for the Cisco Unified IP Phone 7961G.
Table 7. Optional Accessories for Cisco Unified IP Phone 7961G
Part Number Description
CP-LCKNGWALLMNT2=
Locking wall-mounting kit
CP-WALLMOUNT-KIT=
Non-locking wall-mounting kit
CP-PWR-CUBE-3=
Local power adapter for sites where PoE is not available; refer to the Table 6, “AC Country Power Cords”, to select
the correct regional power cord. CP-PWR-CUBE-3= is compatible with and can replace CP-PWR-CUBE-2=.
CISCO UNIFIED IP PHONE 7914 EXPANSION MODULE SUPPORT
An optional 14-button add-on module, the Cisco Unified IP Phone 7914 Expansion Module (part number CP-7914=), provides 14 additional buttons
for programming directory numbers or speed dials, or a combination of the two. Up to two expansion modules can be used with the Cisco Unified
IP Phone 7961G.
WARRANTY
Cisco Unified IP phones are covered by a Cisco standard one-year replacement warranty.

Cisco 7961G Specifications

General

Brand	Cisco
Model	7961G
Category	IP Phone
Language	English