Cisco 7965G Guide

Cisco Unified IP Phone 7965G and 7945G Phone Guide for Cisco Unified Communications Manager 7.1(2) 11
Item Description For more information, see...
1
Programmable
buttons
Depending on configuration, programmable
buttons provide access to:
• Phone lines and intercom lines (line
buttons)
• Speed-dial numbers (speed-dial buttons,
including the BLF speed-dial feature)
• Web-based services (for example, a
Personal Address Book button)
• Phone features (for example, a Privacy,
Hold, or Transfer button)
Buttons illuminate to indicate status:
Green, steady—Active call or
two-way intercom call
Green, flashing—Held call
Amber, steady—Privacy in use,
one-way intercom call, DND
active, or logged into Hunt Group
Amber, flashing—Incoming call or
reverting call
Red, steady—Remote line in use
(shared line or BLF status)
Red, flashing—Remote call on
hold
• Understanding Phone
Screen Features,
page 15
• Basic Call Handling,
page 20
• Speed Dialing, page 39
• Using a Shared Line,
page 43
• Using BLF to
Determine a Line State,
page 47
• Placing or Receiving
Intercom Calls, page 37
2
Footstand button Allows you to adjust the angle of the phone
base.
Adjusting the Handset Rest
(Optional), page 5
3
Display button Awakens the phone screen from sleep mode.
No color—Ready for input
Green steady—Sleep mode
Cleaning and Maintaining
the Phone Screen, page 16
4
Messages button Auto-dials your voice message service (varies
by service).
Accessing Voice Messages,
page 64

Cisco 7965G Specifications

General

Protocol Support	SIP, SCCP
Weight	3.5 lbs (1.6 kg)
Ethernet	10/100 Mbps
Power	IEEE 802.3af Power over Ethernet (PoE)
Expansion Module Support	Supports up to two Cisco Unified IP Phone Expansion Modules
Speakerphone	Full-duplex speakerphone
Lines	6 lines
Codecs	G.711, G.729a, iLBC