Cisco 7965G Guide

14 OL-19612-01
Reverting call A holding call is reverting to your phone. See Using Hold and
Resume, page 26.
Authenticated call See Making and Receiving Secure Calls, page 48.
Encrypted call See Making and Receiving Secure Calls, page 48.
BLF- monitored
line is idle
See Using BLF to Determine a Line State, page 47.
BLF- monitored
line is in-use
See Using BLF to Determine a Line State, page 47.
BLF- monitored
line is ringing (BLF
Pickup)
See Using BLF to Determine a Line State, page 47.
Line in Do Not
Disturb (BLF)
See Using BLF to Determine a Line State, page 47.
Idle Intercom line The intercom line is not in use. See Placing or Receiving Intercom
Calls, page 37.
One-way intercom
call
The intercom line is sending or receiving one-way audio. Placing or
Receiving Intercom Calls, page 37.
Two-way intercom
call
The recipient pressed the intercom line to activate two-way audio
with the caller.
Placing or Receiving Intercom Calls, page 37.
Icon Line or call state Description

Cisco 7965G Specifications

General

Protocol Support	SIP, SCCP
Weight	3.5 lbs (1.6 kg)
Ethernet	10/100 Mbps
Power	IEEE 802.3af Power over Ethernet (PoE)
Expansion Module Support	Supports up to two Cisco Unified IP Phone Expansion Modules
Speakerphone	Full-duplex speakerphone
Lines	6 lines
Codecs	G.711, G.729a, iLBC