Cisco 7965G Guide

22 OL-19612-01
See if a line associated with a
speed-dial, call record, or
directory listing is busy before
placing a call to that line
Look for Busy Line Feature indicators. Using BLF to Determine a
Line State, page 47
Make a priority (precedence)
call (SCCP phones only)
Enter the MLPP access number, then
enter a phone number.
Prioritizing Critical Calls,
page 49
Dial from a Personal Address
Book (PAB) entry
1. Choose > Personal
Directory to log in.
2. Choose Personal Address Book and
search for a listing.
Using Personal Directory
on Your Phone, page 61
Place a call using a billing or
tracking code (SCCP phones
only)
1. Dial a number.
2. After the tone, enter a client matter
code (CMC) or a forced
authorization code (FAC).
Your system
administrator
Place a call using your Cisco
Extension Mobility profile
Log in to the Cisco Extension Mobility
service on a phone.
Using Cisco Extension
Mobility, page 50
Make a call from a mobile
phone using Mobile Voice
Access
1. Before using Mobile Voice Access to
make a call, obtain your Mobile
Voice Access number and End user
PIN from your system administrator.
2. Dial your assigned Mobile Voice
access number.
3. Enter your mobile phone number (if
requested) and PIN.
4. Press 1 to make a call to an
enterprise IP phone.
5. Dial a desktop phone number other
than your desktop phone number.
Using Cisco Extension
Mobility, page 50
If you want to... Then...
For more information,
see...

Cisco 7965G Specifications

General

Protocol Support	SIP, SCCP
Weight	3.5 lbs (1.6 kg)
Ethernet	10/100 Mbps
Power	IEEE 802.3af Power over Ethernet (PoE)
Expansion Module Support	Supports up to two Cisco Unified IP Phone Expansion Modules
Speakerphone	Full-duplex speakerphone
Lines	6 lines
Codecs	G.711, G.729a, iLBC