Cisco 7965G Guide

If you want to... Then...
Place an intercom call to a
preconfigured intercom target
Press (intercom target line) and, after you hear the
intercom-alert tone, begin speaking.
Place an intercom call to any
intercom number
Press (an intercom line). Enter the intercom target number or
press a speed-dial number for your target. After you hear the
intercom-alert tone, begin speaking.
Receive an intercom call When you hear the intercom-alert tone, handle the call in one of these
ways:
• Listen to the message in one-way audio.
• Speak to the caller by pressing (the active intercom line).
• Press EndCall with the intercom call in focus.
38 OL-19612-01

Cisco 7965G Specifications

General

Protocol Support	SIP, SCCP
Weight	3.5 lbs (1.6 kg)
Ethernet	10/100 Mbps
Power	IEEE 802.3af Power over Ethernet (PoE)
Expansion Module Support	Supports up to two Cisco Unified IP Phone Expansion Modules
Speakerphone	Full-duplex speakerphone
Lines	6 lines
Codecs	G.711, G.729a, iLBC