Cisco 800 Series Hardware Installation Guide

A-3
Cisco Integrated Services Router Hardware Installation Guide
Appendix A Technical Specifications
Cisco 810 Series
Radio Immunity EN301 489-1, EN 301 489-7, and EN301 489-24
Transportation/Storage Conditions
Temperature –40 to158 °F (–40 to 70°C)
Humidity 5–95%
Altitude 4570 m (15,000 ft)
AC Power Adapter
Power Source 100–240 VAC
In-ceiling Plenum No
IP41 No
Extended Shock-vibe No
Maximum Power Consumption 25 W
Maximum Output Power Rating 20 W
Operating Temperature –13 to 140 °F (–25 to 60 °C)
PoE+ Splitter
Power Source PoE+ (IEEE802.3at Class 4)
In-ceiling Plenum Yes
IP41 No
Extended Shock-vibe No
Maximum Power Consumption 25 W
Maximum Output Power Rating 20 W
Operating Temperature –13 to 140 °F (–25 to 60 °C)
Embedded WiFi Antenna
Frequency Range — 2.4–2.5 Ghz
4.9–5.875 Ghz
Peak Gain — 4 dBi (2.4 GHz)
6 dBi (5.875 Ghz)
Voltage Standing Wave Ratio — 2.5:1 maximum for all bands
Nominal Impedance — 50 ohms
1. Routers shipped in People’s Republic of China.
Table A-1 Cisco 812 ISR Specifications (continued)
Description
C812G+7-K9
(3G only)
C812G-CIFI+7-E-K9
C812G-CIFI+7-N-K9
C812G-CIFI-V-A-K9
C812G-CIFI-S-A-K9
(3G + WiFi)

Cisco 800 Series Specifications

General

Model	Cisco 800 Series
Category	Network Router
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Processor	Varies by model
Memory	Varies by model
Operating System	Cisco IOS
WAN Ports	Varies by model
LAN Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Fast Ethernet or Gigabit Ethernet