Cisco 800 Series Hardware Installation Guide

A-4
Cisco Integrated Services Router Hardware Installation Guide
Appendix A Technical Specifications
Cisco 810 Series
Mean Time Between Failure Ground Benign Environment
Table A-2 lists the Mean Time Between Failure (MTBF) values for Cisco 812 ISRs. The MTBF is
calculated based on the Ground Benign condition. The values may be adjusted based on the different
router usage.
Cisco 819 Series
This section provides router, port, cabling specifications, and power adapters for the Cisco 812 ISRs and
contains the following topics:
• Router Specifications, page A-4
• Mean Time Between Failure Ground Benign Environment, page A-8
• Supported Power Adapters, page A-9
Warning Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
Note For compliance and safety information, see the Regulatory Compliance and Safety Information
Roadmap that was shipped with the router and Regulatory Compliance and Safety Information for
Cisco 800 Series Routers.
Router Specifications
Table A-1 lists the operational limits of the Cisco 819 ISR. Operating the router outside of the limits
specified is not supported. For the complete list of SKUs available for each Cisco 819 ISRs, see the
“SKU Information” section on page 1-14.
Table A-2 MTBF Values
SKUs MTBF (hours)
C812G-CIFI-V-A-K9
C812G-CIFI-S-A-K9
210,000
C812G-CIFI+7-E-K9
C812G-CIFI+7-N-K9
280,000
C812G+7-K9 340,000

Cisco 800 Series Specifications

General

Model	Cisco 800 Series
Category	Network Router
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Processor	Varies by model
Memory	Varies by model
Operating System	Cisco IOS
WAN Ports	Varies by model
LAN Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Fast Ethernet or Gigabit Ethernet