New and Changed SectionsRevisions
DND and Call Forwarding Status Sync, on page 227
Enable Feature Key Sync, on page 228
Enable Call Forwarding Status Sync via XSI Service,
on page 228
Enable DND Status Sync via XSI Service, on page
229
XSI Line Service, on page 330
Added new fields and topics to support the feature of
DND and call forwarding status sync
Phone Configuration for Monitoring Other Phones,
on page 192
Added a new topic replacing the existing Busy Lamp
Field Configuration on a Monitoring Phone.
Enable Users to Configure Features on Line Keys, on
page 187
Added a new task on how to phone users to configure
speed dial and monitor a coworker's line.
Include a Device Identifier in Uploaded Syslog
Messages, on page 241
Added a new topic about including a device identifier
in uploaded syslog messages.
Report a Phone Problem Remotely, on page 360
PRT Status, on page 255
Added new fields and a new task on how to remotely
report phone problems.
Optional Network Configuration, on page 266
Added the Syslog Identifier field.
Configuration Profile, on page 282
Replaced the Profile Account Enable parameter with
the Profile Authentication Type field
Updated the description of the Profile Rule parameter.
Upload Configuration Options, on page 289
Updated Report Rule and added new parameters:
Report to Server, periodic Upload to Server, and
Upload Delay on Local Change.
Line Key, on page 308
Updated the description for the Extension field.
LDAP, on page 315
Updated the description of the First Name Filter and
Last Name Filter fields.
Voice > Ext (n) > General, on page 319Example XML parameter configuration is added for
the Line Enable parameter.
Allocate a Key Expansion Module Type, on page 119
Allocate a Key Expansion Module Type with the
Phone Menu, on page 119
Added a new task on how to assign the new MPP key
expansion modules—Cisco IP Phone 8851/8861 Key
Expansion Module and Cisco IP Phone 8865 Key
Expansion Module
General, on page 340Added a new field in the General table to support the
new parameter“ KEM Type” that is added to the
phone web page
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
2
New and Changed Information
New and Changed for Firmware Release 11.2(3)
To Next Page
Loading...
Need help?
General
