Cisco 8861 - Page 331

Multiple Paging Group Parameters
DescriptionFeature
Enter a string to configure group paging and priority paging (out of band paging) that
doesn’t require the phone registration.
Group Paging Script
LDAP
DescriptionParameter
Choose Yes to enable LDAP.
Default: No
LDAP Dir Enable
Enter a free-form text name, such as “Corporate Directory.”
Default: Blank
Corp Dir Name
Enter a fully qualified domain name or IP address of an LDAP
server in the following format:
nnn.nnn.nnn.nnn
Enter the host name of the LDAP server if the MD5 authentication
method is used.
Default: Blank
Server
Specify a starting point in the directory tree from which to search.
Separate domain components [dc] with a comma. For example:
dc=cv2bu,dc=com
Default: Blank
Search Base
Enter the distinguished name domain components [dc]; for
example:
dc=cv2bu,dc=com
If you are using the default Active Directory schema
(Name(cn)->Users->Domain), an example of the client DN
follows:
cn=”David Lee”,dc=users,dc=cv2bu,dc=com
cn=”David Lee”,dc=cv2bu,dc=com
username@domain is the client DN format for a Windows server
For example, DavidLee@cv2bu.com
Default: Blank
Client DN
Enter the username for a credentialed user on the LDAP server.
Default: Blank
User Name
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
315
Cisco IP Phone Troubleshooting
Multiple Paging Group Parameters