Cisco 8861 - Page 285

DescriptionParameter
Choose Yes to enable SSLv3. Choose No to disable.
Default: No
Enable SSLv3
Wi-Fi Settings
DescriptionParameter
Allows you to turn on or off the Wi-Fi on your phone.
Select Yes if you want to turn on the Wi-Fi and No
if you want to turn it off.
Default: Yes
Phone-wifi-on
Wi-Fi Profile (n)
DescriptionParameter
Allows you to enter a name for the SSID. This name
displays on the phone. Multiple profiles can have the
same network name with different security mode.
Network Name
Allows you to select the authentication method that
is used to secure access to the Wi-Fi network.
Depending on the method you choose, a password,
passphrase, or key field appears so that you can
provide the credentials that are required to join this
Wi-Fi network. Options are:
• Auto
• EAP-FAST
• PEAP-GTC
• PEAP-MSCHAPV2
• PSK
• WEP
• None
Default: None
Security Mode
Allows you to enter a user ID for the network profile.
This field is available when you set the security mode
to Auto, EAP-FAST, PEAP-GTC, or PEAP
(MSCHAPV2). This is a mandatory field and it allows
maximum length of 32 alphanumeric characters.
Wi-Fi User ID
Allows you to enter the password for the specified
Wi-Fi User ID.
Wi-Fi Password
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
269
Cisco IP Phone Troubleshooting
Wi-Fi Settings