Cisco 8861 Installation Guide

Installation Guide for Cisco IP Phone with Multiplatform Firmware
26
Wall Mount Your 8800 Series Phones
Wall Mount Your Phone
Wall Mount Your 8851 or 8861 Phone with a KEM Attached
Mount the wall bracket in the desired location.
1
Plug in the handset cable, then attach the phone
bracket to the rear panel of the phone and KEM
assembly.
2
447142
Components:
1. Six #8-18 x 1.25-inch Phillips-head
screws with
2. Six anchors
3. One phone bracket
4. One wall bracket
5. Three K30x8mm self-tapping
screws
6. One 6-inch Ethernet cable
1 2 3 4
5
6
447345
1
2
4
3
5
447346

Cisco 8861 Specifications

General

Resolution	800 x 480 pixels
Audio	Wideband audio
Ethernet Ports	2 x 10/100/1000
Speakerphone	Full-duplex
Display	5-inch color display
Lines	5
PoE	Yes (802.3af)
Protocols	SIP, SDP, SRTP
Wi-Fi	802.11a/b/g/n/ac
Headset Jack	Yes
Codecs	G.711, G.722, G.729, iLBC
USB Port	2 x USB 2.0
USB Ports	2 x USB 2.0
Supported Languages	Multiple (English, French, Spanish, etc.)