Cisco 8865 - Set Up Wideband for an Analog Headset

Cisco IP Phone 8861 and 8865 Wireless LAN Deployment Guide
140
8865 Specific Configuration Options
XML Syntax
To configure product specific configuration options for the Cisco IP Phone 8861 and 8865 with Cisco Unified Communications
Manager Express, add the necessary options under telephony-service.
service phone <module> <value>
WLAN Profile 1 Prompt Mode
This parameter enables or disables WLAN prompt mode, where user is prompted
to re-enter password on device start up or reboot.
Line Mode
This parameter allows admin to switch between Session Line Mode and
Enhanced Line Mode. While in Session Line Mode, the buttons on the left of the
screen can be configured as programmable line keys and the buttons on the right
of the screen are always session keys. While in Enhanced Line Mode, all the
buttons can be configured as programmable line keys.
Field Name
Description
Start Video Port
This is to set the video start port.
Stop Video Port
This is to set the video stop port.
Field Name
Module
Value
Disable Speakerphone
disableSpeaker
false = Disabled
true = Enabled
Disable Speakerphone and
Headset
disableSpeakerAndHeadset
false = Disabled
true = Enabled
PC Port
pcPort
0 = Enabled
1 = Disabled
Settings Access
settingsAccess
0 = Disabled
1 = Enabled
2 = Restricted
PC Voice VLAN Access
voiceVlanAccess
0 = Enabled
1 = Disabled