Select a USB Headset
You can only plug in one USB headset. If you are using an analog headset, you can switch to your USB
headset by using the Accessories window of the phone.
Procedure
Step 1 On your phone, press Applications .
Step 2 Select Status.
Step 3 Select Accessories.
Step 4 Press the Navigation cluster, up or down, to select the USB headset.
Stop Using a USB Headset
You can stop using your USB headset and select a different headset in the Accessories window of the phone.
Procedure
Step 1 On your phone, press Applications .
Step 2 Select Status.
Step 3 Select Accessories.
Step 4 Press the Navigation cluster, up or down, to select a different headset.
Wireless Headsets
You can use most wireless headsets with your phone. For a list of supported wireless headsets, see
http://www.cisco.com/c/en/us/products/unified-communications/uc_endpoints_accessories.html
Refer to your wireless headset documentation for information about connecting the headset and using the
features.
Bluetooth Wireless Headsets
For a list of supported headsets, see http://www.cisco.com/c/en/us/products/unified-communications/uc_
endpoints_accessories.html.
Bluetooth enables low-bandwidth wireless connections within a range of 30 feet (10 meters). The best
performance is in the 3- to 6-foot (1- to 2-meter) range. Bluetooth wireless technology operates in the 2.4
GHz band, which is the same as the 802.11b/g band.
Cisco IP Phones use a shared key authentication and encryption method to connect up to fifty headsets, one
at a time. The last connected headset is used as the default. Pairing is typically performed once for each
headset.
Cisco IP Phone Accessories
11
Cisco IP Phone Accessories
Select a USB Headset
To Next Page
Loading...
Need help?
General
