Cisco 8865NR

Procedure
Step 1 Press Applications .
Step 2 Select Admin settings.
Step 3 Select one of the following menu items:
• All phones connected to the Ethernet: Ethernet setup
• Cisco IP Phone 8861 and 8865 users that use Wi-Fi: Network setup > Wi-Fi client setup
Step 4 Select IPv4 Setup.
Step 5 Navigate to Alternate TFTP and choose On.
Step 6 Select TFTP server 1.
Step 7 Enter your TFTP server address in the TFTP server 1 field.
Step 8 Press Apply.
Step 9 Press Continue.
Step 10 Press Exit.
Connect with Activation Code Onboarding
If your network has been configured to support this feature, then you can use Activation Code Onboarding
to connect to your company's phone network.
Enter an Activation Code
Activation codes are used to set up your new phone. They can only be used once, and expire after 1 week.
Contact your administrator if you don't know your code or if you need a new one.
Procedure
Step 1 Enter your activation code on the activation screen.
Step 2 Press Submit.
Activate Your Phone with a QR Code
If your phone has a camera, you can scan a QR code to activate the phone. If you inadvertently press Enter
manually, press Back to return to the QR code screen.
Before you begin
You need the QR code for your phone. If you are assigned to a phone, then the code is available on the Self
Care Portal. But your administrator may have blocked you from viewing this information.
Codes are valid for up to 1 week by default, and have an expiry date near the bottom of the graphic. If the
code has expired or if you need a code, then contact your administrator.
Your Phone
12
Your Phone
Connect with Activation Code Onboarding