Cisco 8865NR

Updated SectionRevision
In certain circumstances, users who dialed a number
that was busy received the reorder tone. With this
release, the user hears the busy tone.
Updated the LED states, based on the line mode:
Softkey, Line, and Feature Buttons, on page 23
New section Phone Icons, on page 24
Updated Enhanced Line Mode, on page 40 for string
change.
General changes
New and Changed Information for Firmware Release 12.6(1)
All references into Cisco Unified Communications Manager documentation have been updated to support all
Cisco Unified Communications Manager releases.
The following table shows the changes made for Firmware Release 12.6(1).
Table 4: Cisco IP Phone 8800 User Guide Revisions for Firmware Release 12.6(1)
Updated SectionRevision
Normal Line Mode, on page 40Updated for improved Session line mode
Enhanced Line Mode, on page 40Updated for improved Enhanced line mode
New and Changed Information for Firmware Release 12.5(1)SR3
All references into Cisco Unified Communications Manager documentation have been updated to support all
Cisco Unified Communications Manager releases.
The following table shows the changes made for Firmware Release 12.5(1)SR3.
Table 5: Cisco IP Phone 8800 User Guide Revisions for Firmware Release 12.5(1)SR3
Updated SectionRevision
Reset Cisco Headset Settings from Your PhoneAdded support for Reset Headset Settings
Phone Keypad Characters, on page 22New topic
Share a Network Connection with Your Phone and
Computer, on page 10
New topic
Protect Your Video Phone Camera, on page 15New topic
New and Changed Information for Firmware Release 12.5(1)SR2
No user guide updates were required for Firmware Release 12.5(1)SR2.
Your Phone
4
Your Phone
New and Changed Information for Firmware Release 12.6(1)