A-5
Cisco Integrated Services Router Hardware Installation Guide
Appendix A Technical Specifications
Cisco 810 Series
Table A-3 Cisco 819 ISR Specifications
Description
Hardened Design
Specification
(Cisco 819HG and Cisco
819HG-4G ISRs)
Non-Hardened Design
Specifications
(Cisco 819G and Cisco
819G-4G ISRs)
Hardened Design Specifications
(C819HGW and C819HWD ISRs)
Physical Characteristics
Dimensions (H x W x D) 1.73 x 7.7 x 8.1 in
(44 x 196 x 206 mm)
1.67 x 7.7 x 7.2 in
(42 x 196 x 183 mm)
1.73 x 7.7 x 9.0 in
(44 x 196 x 229 mm)
Weight 3.3 lb (1.5 kg) 2.3 lb (1.0 kg) 3.4 lb (1.54 kg)
Maximum Power
Consumption
11 W 20 W
Environmental Operating Ranges
Operating Temperature and
Altitude
–13 to 140°F
(–25 to 60°C)
32 to 104°F
(0 to 40°C)
–13 to 140°F
(–25 to 60°C)
Derate max operating temperature 1.5°C per 1000 feet above 5000 ft
10,000 ft maximum
Humidity Maximum 95%
non-condensing RH
Maximum 85%
non-condensing RH
Maximum 95% non-condensing
RH
Environmental Tests
Ingress Protection Rating IP 41 per IEC 60529 for
Vertical Falling Water,
Pollution Degree 3
IP 20 per IEC 60529 IP 41 per IEC 60529 for Vertical
Falling Water, Pollution Degree 3
Humidity Non-condensing Relative Humidity: 5% to 95%
Pollution Pollution 3 for Dust
Military Standard MIL-STD-810G Method 514.6: Procedure 1 Category 4, Secured Cargo - Common Carrier
MIL-STD-810G Method 514.6: Procedure 1 Category 20, Ground Vehicles
MIL-STD-810G Method 516.6. Procedure 1, Functional Shock
MIL-STD-810G Method 516.6. Procedure 5, Crash Hazard
MIL-STD-810G Method 516.6. Procedure 6, Bench Handling
Vibration and Shock
(Railway Vehicles)
EN61373 Functional Random Vibe - Category 1, Class B
EN61373 Simulated Non-op Long-life Vibe - Category 1, Class B
EN61373 Non-op Shock, Class B
Heavy-Duty Vehicle
Applications
SAE J1455 Operating Random Vibe, Cab Mounted Truck
SAE J1455 Operating Sinusoidal Vibe, Category 3
SAE J1455 Non-operating Sinusoidal Vibe, Category 3
SAE J1455 Handling Drop Test
Certifications
To Next Page
Loading...
Need help?
General
