EasyManuals Logo

Cisco 8941 Administration Guide

Cisco 8941
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Cisco Unified IP Phone Installation
Verify Network Setup, page 1
Enable Autoregistration for Phone , page 2
Install Cisco Unified IP Phone, page 3
Set Up Phone from Setup Menus, page 4
Configure Network Settings, page 6
Phone Startup Process, page 14
Configure Phone Services for Users, page 15
Verify Network Setup
Before you install a phone, you must decide how to configure the phone in your network. Then you can install
the phone and verify its functionality.
For the phone to successfully operate as an endpoint in your network, your network must meet specific
requirements.
The phone displays the date and time from Cisco Unified Communications Manager. The time displayed
on the phone can differ from the Cisco Unified Communications Manager time by up to 10 seconds.
Note
Procedure
Step 1
Configure a VoIP Network to meet the following requirements:
VoIP is configured on your Cisco routers and gateways.
Cisco Unified Communications Manager is installed in your network and is configured to handle call
processing.
Step 2
Set up the network to support one of the following:
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP
and SIP)
1

Other manuals for Cisco 8941

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 8941 and is the answer not in the manual?

Cisco 8941 Specifications

General IconGeneral
Resolution320 x 240 pixels
ProtocolsSIP, SCCP
SpeakerphoneFull-duplex speakerphone
USB PortNo
BluetoothNo
Wi-FiNo
Ethernet10/100/1000 Mbps
AudioWideband audio
VideoNo
PoEIEEE 802.3af compliant
Buttons4 line keys, navigation cluster
HeadsetYes
Codec SupportG.711, G.722, G.729, iLBC
Headset PortYes, RJ9
Weight1 kg

Related product manuals