Cisco 9971 - Configuring the Cisco Unified Wireless LAN Controller and Access Points

Cisco Unified IP Phone 9971 Wireless LAN Deployment Guide
56
Enable individual phone configuration files with the following commands.
telephony-service
cnf-file perphone
create cnf-files
For more information on these features, see the Cisco Unified IP Phone 9971 Administration Guide or the Cisco Unified IP
Phone 9971 Release Notes.
http://www.cisco.com/en/US/products/ps10453/prod_maintenance_guides_list.html
http://www.cisco.com/en/US/products/ps10453/prod_release_notes_list.html
Configuring the Cisco Unified Wireless LAN Controller and Access
Points
When configuring the Cisco Unified Wireless LAN Controller and Access Points, use the following guidelines:
• Ensure CCKM is Enabled if utilizing 802.1x authentication
• Set Quality of Service (QoS) to Platinum
Background Image
defaultWallpaperFile
<Wallpaper_file>
Simplified New Call UI
simplifiedNewCall
0 = Disabled; 1 = Enabled
Enable VXC VPN for MAC
enableVXCVPNForMAC
<MAC_Address>
Example: FFFFFFFFFFFF
VXC VPN Option
vxcVpnOption
0 = Dual Tunnel; 1 = Single Tunnel
VXC Challenge
vxcChallenge
0 = Challenge; 1 = No Challenge
VXC-M Servers
vxcManagers
x.x.x.x
Revert to All Calls
revertToAllCalls
0 = Disabled; 1 = Enabled
80-bit SRTCP
SRTCP80bit
0 = Disabled; 1 = Enabled
RTCP for Video
VideoRTCP
1 = Enabled; 0 = Disabled
Record Call Log from Shared
Line
logCallFromSharedLine
0 = Disabled; 1 = Enabled
Show Call History for Selected
Line Only
showCallHistoryForSelectedLine
0 = Disabled; 1 = Enabled
Actionable Incoming Call Alert
actionableAlert
0 = Disabled ; 1 = Show for all Incoming Call; 2=
Show for Invisible Incoming Call
DF bit
dfBit
<0,1>
Default Line Filter
defaultLineFilter
<Line_Numbers>