PurposeCommand or Action
Configures a CE neighbor. The ip-address argument
must be a private address.
neighbor ip-address
Example:
RP/0/RSP0/CPU0:router(config-bgp)# neighbor
Step 3
10.0.0.2
Configures the remote AS for the CE neighbor.
remote-as as-number
Example:
RP/0/RSP0/CPU0:router(config-bgp-nbr)# remote-as
Step 4
1
Distributes BGP link-state information to the specified
neighbor.
address-family link-state link-state
Example:
RP/0/RSP0/CPU0:router(config-bgp-nbr)#
Step 5
address-family link-state link-state
commit
Step 6
Configuring Domain Distinguisher
To configure unique identifier four-octet ASN, perform these steps:
SUMMARY STEPS
1.
configure
2.
router bgp as-number
3.
address-family link-state link-state
4.
domain-distinguisher unique-id
5.
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
144 OL-30423-03
Implementing BGP
Configuring BGP Link-State
To Next Page
Loading...
Need help?
General
