SUMMARY STEPS
1.
configure
2.
bfd
3.
echo disable
4.
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Enters BFD configuration mode.bfd
Example:
RP/0/RSP0/CPU0:router(config)# bfd
Step 2
Disables echo mode on the router.echo disable
Example:
RP/0/RSP0/CPU0:router(config-bfd)# echo disable
Step 3
commit
Step 4
Disabling Echo Mode on an Individual Interface or Bundle
The following procedures describe how to disable echo mode on an interface or bundle .
SUMMARY STEPS
1.
configure
2.
bfd
3.
interface type interface-path-id
4.
echo disable
5.
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
214 OL-30423-03
Implementing BFD
Disabling Echo Mode
To Next Page
Loading...
Need help?
General
