Cisco A9K-SIP-700 Configuration Guide

SUMMARY STEPS
1.
configure
2.
router eigrp as-number
3.
address-family { ipv4 }
4.
router-id id
5.
default-metric bandwidth delay reliability loading mtu
6.
distance internal-distance external-distance
7.
interface type interface-path-id
8.
holdtime seconds
9.
bandwidth-percent percent
10.
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Specifies the autonomous system number of the routing
process to configure an EIGRP routing process.
router eigrp as-number
Example:
RP/0/RSP0/CPU0:router(config)# router eigrp
100
Step 2
Enters an address family configuration mode.address-family { ipv4 }
Example:
RP/0/RSP0/CPU0:router(config-eigrp)#
address-family ipv4
Step 3
(Optional) Configures a router-id for an EIGRP process.
router-id id
Step 4
Example:
RP/0/RSP0/CPU0:router(config-eigrp)# router-id
172.20.1.1
It is good practice to use the router-id command to
explicitly specify a unique 32-bit numeric value for
the router ID. This action ensures that EIGRP can
function regardless of the interface address
configuration.
Note
(Optional) Sets metrics for an EIGRP process.
default-metric bandwidth delay reliability
loading mtu
Step 5
Example:
RP/0/RSP0/CPU0:router(config-eigrp-af)#
default-metric 1000 100 250 100 1500
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
254 OL-30423-03
Implementing EIGRP
Enabling EIGRP Routing

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English