C-6
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-8370-04
Appendix C Access Point Specifications
Compliance The 1200 series access point complies with UL 2043 for products installed in a building’s
environmental air handling spaces, such as above suspended ceilings.
Caution Only the fiber-optic power injector (AIR-PWRINJ-FIB) has been tested to UL 2043 for
operation in a building’s environmental air space; no other power injectors or power modules
have been tested to UL 2043 and they should not be placed in a building’s environmental
air space, such as above suspended ceilings.
Note If you plan to mount the access point in environmental air space using a 802.11a radio, Cisco
recommends that you mount the access point horizontally with its antennas pointing down.
Doing so results in the access point complying with regulatory requirements for
environmental air space with an 802.11a radio installed.
Safety Designed to meet:
• UL 1950 Third Edition
• CSA 22.2 No. 950-95
• IEC 60950 Second Edition, including
Amendments 1-4 with all deviations
• EN 60950 Second Edition, including
Amendments 1-4
Designed to meet:
• UL 1950 Third Edition
• CSA 22.2 No. 950-95
• IEC 60950 Second Edition, including
Amendments 1-4 with all deviations
• EN 60950 Second Edition, including
Amendments 1-4
Radio Approvals 802.11b radio:
FCC Part 15.247
Canada RSS-210
Japan ARIB-STD-33B
EN 300.328
ARIB STD-66
802.11g radio:
FCC Parts 15.247, 15.205, 15.209
Canada RSS-210
Japan ARIB-STD-33B
Japan ARIB-STD-66
Europe EN-300.328
FCC Part 15.407
Canada RSS-210
Japan ARIB STD-T71
EN 301.893
EMI and Susceptibility FCC Part 15.107 and 15.109 Class B
ICES-003 Class B (Canada)
EN 55022 B
EN 60601-1-2:2001
AS/NZS 3548 Class B
VCCI Class B
EN 55024
EN 301.489-1
EN 301.489-17
RF Exposure OET-65C
RSS-102
ANSI C95.1
Table C-1 Access Point Specifications (continued)
Category Access Point with 802.11b or 802.11g Radio Access Point with 802.11a Radio Module
To Next Page
Loading...
