22
78-15954-02
Default
Gateway
Identifies the address the bridge uses to access another
network. Provided by your network administrator. The
entry 255.255.255.224 indicates no gateway.
If DHCP is enabled, leave this field blank.
SNMP
Community
Identifies the Simple Network Management Protocol
(SNMP) used to manage the network on which the bridge
resides. Sets protocol attributes. Provided by your
network administrator.
Attribute Description
Read-Only Bridge allows only SNMP read acesses.
User cannot change bridge configuration.
Read-Write Bridge allows SNMP read and write
accesses. User can change bridge
configuration.
Setting Description and Default
To Next Page
Loading...
