9
Quick Start Guide Cisco Aironet 1300 Series Access Point
Note The access point/bridge uses a blinking code to identify various
error conditions. See the Cisco Aironet 1300 Outdoor Access Point/
Bridge Hardware Installation Guide for a detailed description of the
codes.
Blinking
amber
— General warning.
Red Amber Red Loading Firmware error.
— — Blinking
green
Transmitting and receiving radio
packets—normal operation.
— — Blinking
amber
Maximum retries or buffer full
occurred on radio interface.
Amber Radio firmware error.
Ethernet
LED
Status
LED
Radio
LED
Meaning
To Next Page
Loading...
Need help?
General
