1-3
Cisco Aironet 1530 Series Outdoor Access Point Hardware Installation Guide
OL-30864-01
Chapter 1 Overview
Hardware Features
Hardware Features
This section describes the hardware features of the 1532 access point models. The following hardware
features are described in this section:
• Connectors, page 1-3
• Antenna Port Locations, page 1-7
• Multiple Power Sources, page 1-8
• Ethernet (PoE) Ports, page 1-10
• Optional Hardware, page 1-10
Connectors
Figure 1-4 and Figure 1-5 show the access point connectors for all models. Figure 1-1 shows the bottom
connectors for internal antenna model, and Figure 1-2 and Figure 1-3 show the external antenna Type-N
connectors.
Note The illustrations in this document show all available connections for the access point. Unused
connections are capped with a connector plug to ensure the watertight integrity of the access point.
Liquid-tight adapters are provided for connector openings, which can be installed before or after
deploying the access point.
1532I/1532E Connectors
Figure 1-1 Access Point Models AIR-CAP1532I-x-K9 Bottom Connectors
1 LAN port 2 POE-in port
To Next Page
Loading...
