2-23
Cisco Aironet 1530 Series Outdoor Access Point Hardware Installation Guide
OL-30864-01
Chapter 2 Installing the Access Point
Mounting the Access Point
Figure 2-12 AP Pivot Mounted
Step 8
Continue with the Grounding the Access Point, page 2-40
Horizontally Mounting the Access Point with Optional Horizontal Mount Plate
The pivoting pole mount kit also contains a plate that allows the option of the AP enclosure to be
mounted horizontally (See Figure 2-13).
Table 2-5 Materials Needed to Mount the AP on a Vertical Pole with the Pivoting Mounting Kit
1 Bolted Bracket Mounting Holes 2 Mounting Slots
3 Pole 4 Metal Band Mounting Straps.
For the kit which uses a clamp instead of
metal bands, see Figure 2-10.
Materials Required In Kit
Ground lug and screws (provided with access point) Yes
Pivoting mount kit and hardware Yes
(8) M6 x 12-mm Hex-head Bolts Yes
Adapter bracket for option horizontal mount Yes
Two stainless steel band clamps (adjustable 2"-5", 51 mm -
127 mm)
Yes
Two stainless steel band clamps (adjustable 5"-8", 127 mm -
203 mm)
Yes
Crimping tool for ground lug, Panduit CT0720 with
CD-720-1 die (http://www.panduit.com)
No
Four wall mounting screws (6mm max) No
Four wall anchors (specified for all material) No
To Next Page
Loading...
