Cisco APIC L3 - Installing the Cisco APIC Server; Preparing for Server Installation

CHAPTER 1
Overview
• Overview, on page 1
• External Features, on page 1
• Serviceable Component Locations, on page 3
• Summary of Server Features, on page 5
Overview
Cisco APIC Server M3 and L3 (APIC-SERVER-M3 and APIC-SERVER-L3)—Small form-factor (SFF)
drives, with 10-drive backplane. Supports up to 10 2.5-inch SAS/SATA drives. Drive bays 1 and 2 support
NVMe SSDs.
External Features
This topic shows the external features of the server versions.
Cisco APIC M3 and L3 Server (SFF Drives) Front Panel Features
The following figure shows the front panel features of the small form-factor drive versions of the server.
Cisco APIC M3/L3 Server Installation and Service Guide
1