Cisco ASR 1002-X Overview And Installation

Step 6 Continue with the installation by referring to the procedure described in the Connecting External Cables to the Cisco
ASR 1002-X Router, on page 42.
Connecting External Cables to the Cisco ASR 1002-X Router
Keep the following guidelines in mind when connecting external cables to the Cisco ASR 1002-X Router:
• To reduce the chance of interference, avoid crossing high-power lines with any interface cables.
• Verify all the cabling limitations (particularly, distance) before powering on the system.
Cisco ASR 1002-X Router Overview and Installation
42
Cisco ASR 1002-X Router Overview and Installation
Connecting External Cables to the Cisco ASR 1002-X Router

Cisco ASR 1002-X Specifications

General

Form Factor	Rack-mountable
Rack Units	2RU
Integrated Services	Yes
Maximum Memory	16 GB
Built-in Gigabit Ethernet Ports	6
Input Voltage	100-240 VAC
Operating Temperature	32 to 104°F (0 to 40°C)
Redundancy	Power supply redundancy
Network Interface Modules	Up to 4 SPA/SIP slots
Embedded Services Processor (ESP)	ESP-20
Maximum Packet per Second (PPS)	15 Mpps
Height	3.5 inches
Fixed Ports	6 GE ports
Memory	4 GB (default), 16 GB (maximum)
Power Supply	Dual power supplies (AC or DC)
Dimensions (H x W x D)	3.5 x 17.5 x 19.0 in (8.9 x 44.5 x 48.3 cm)