Cisco ASR 1013 - Critical Initial Setup Configuration Options; Enabling FIPS Mode for TOE

Figure 10: Cisco ASR1001 Router Front Panel
Internal hard drive2Internal hard drive fastener screw1
Step 4 Pull the hard drive out as shown in xref Figure 14-7.
Figure 11: Cisco ASR1001 Router Hard Drive
Hard drive2Hard drive fastener screw location1
Step 5 Place the hard drive in an antistatic bag if you are returning it.
Step 6 Wait until the following console message is displayed:
Example:
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
17
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Removing the Hard Drive from the Cisco ASR 1001 Router