Cisco ASR 1013 - Secure Acceptance and Integrity Verification of the TOE; Physical Inspection and Packaging Verification

DETAILED STEPS
Step 1
Locate the threaded holes on the rear side of the chassis. Make certain that you hold the rear t rack-mount bracket with
the ear and holes facing outward and towards the rear of the chassis (see the following image, callout number 4).
Figure 4: Location of the Rear Rack-Mount Brackets on the Cisco ASR 1013 Router
Cisco ASR 1000 Series Router Hardware Installation Guide
11
Cisco ASR 1013 Router Overview and Installation
Attaching the Rear Rack-Mount Brackets