Cisco ASR 1013 - Critical Initial Setup Configuration Options; Enabling FIPS Mode for TOE

What to Do Next
You can install your Cisco AR1006 chassis on a two-post rack or a four-post rack. See the Two-Post Rack
Installation, on page 17 and the four-post rack installation, go to the Four-Post Rack Installation, on page
19.
Two-Post Rack Installation
The Cisco ASR 1013 Router can be installed on a two-post 19-inch equipment rack. The following image
shows the Cisco ASR 1013 Router installed on a two-post rack.
Figure 7: Installing the Cisco ASR 1013 Router on a Two-Post Rack
Cisco ASR 1000 Series Router Hardware Installation Guide
17
Cisco ASR 1013 Router Overview and Installation
Two-Post Rack Installation