Cisco ASR 5000 Series - Page 62

L-ESS Installation and Configuration
▀ Installing L-ESS Application in Cluster Mode
▄ Cisco ASR 5000 Series External Storage Server Installation and Administration Guide
62
OL-22979-03
Parameter
Description
Default
Value
Add SNMP host
Type (Y)es to add another SNMP Manager host.
Important: The maximum number of SNMP Manager hosts that are
allowed to be configured is four.
Important: The default values for all the parameters except SNMP
Manager Host Name will be taken from previous host configuration for the new
host.
No
Remove SNMP
host
Type (Y)es to remove the currently configured SNMP Manager host.
No
Log level
This value specifies the severity of log messages. The values can be one of the following:
 0 - Disable all logs
 1 - Debug Level logs
 2 - Info Level logs
 3 - Warning Level logs
 4 - Error Level logs
 5 - Critical Level logs
4
SNMP Host Configuration
SNMP host name
Type the hostname or IP address where the SNMP Manager resides.
Null
SNMP port
Type the SNMP Manager port number.
162
SNMP community
string
Type the community string that should be used while sending the SNMP traps.
public
Remote Host Configuration
Host Name or IP
Address of Starent
Platform
To establish an SFTP connection, type the hostname or IP address of the chassis.
Important: This parameter is applicable only if the source or destination is
at remote location.
Null
SFTP User Name
Type the user name used to log on to chassis.
Important: This parameter is applicable only if the source or destination is
at remote location.
Null