Cisco ASR 903 Guide

BGP PIC & RFC3107
Configuration for BGP PIC (with OSPF) ▀
Cisco ASR 903 Router Design and Deployment Guide▄
OL-30526-01
119
route-policy DENY in
route-policy PERMIT out
interface Loopback10
!
interface GigabitEthernet0/0/0/17
!
interface GigabitEthernet0/0/0/18
!
!
!
router bgp 100
ibgp policy out enforce-modifications
address-family ipv4 unicast
advertise best-external
allocate-label all
!
neighbor 172.16.2.2
remote-as 100
update-source Loopback10
address-family ipv4 unicast
next-hop-self
!
address-family ipv4 labeled-unicast
next-hop-self
!
!
neighbor 172.16.4.4
remote-as 100
update-source Loopback10
address-family ipv4 unicast
route-reflector-client
next-hop-self
!
address-family ipv4 labeled-unicast
route-reflector-client
next-hop-self
!
!
neighbor 172.16.11.11
remote-as 100
update-source Loopback10
address-family ipv4 unicast
!
!
!
route-policy DENY
drop
end-policy
!

Cisco ASR 903 Specifications

General

Form Factor	Modular
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% non-condensing
Redundancy	Yes, redundant power supplies and route processors
Operating System	Cisco IOS XE
Power Supply	AC or DC
Switching Capacity	240 Gbps
Operating Temperature	-40°C to 65°C (-40°F to 149°F)
MTBF	200, 000 hours
Supported Protocols	IPv4, IPv6, MPLS, L2VPN, L3VPN
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, T1/E1