Cisco ASR 903 Guide

Clocking
▀ PTP Configuration
▄ Cisco ASR 903 Router Design and Deployment Guide
142
OL-30526-01
ASR903-R4# show ptp clock running domain 0
PTP Ordinary Clock [Domain 0]
State Ports Pkts sent Pkts rcvd Redundancy Mode
PHASE_ALIGNED 1 106295 321979 Hot standby
PORT SUMMARY
PTP Master
Name Tx Mode Role Transport State Sessions
Port Addr
SLAVE unicast slave Lo10 Slave 2
10.10.158.1
SESSION INFORMATION
SLAVE [Lo10] [Sessions 2]
Peer addr Pkts in Pkts out In Errs Out Errs
10.10.158.1 160990 53148 0 0
10.10.158.2 160989 53147 0 0

Cisco ASR 903 Specifications

General

Form Factor	Modular
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% non-condensing
Redundancy	Yes, redundant power supplies and route processors
Operating System	Cisco IOS XE
Power Supply	AC or DC
Switching Capacity	240 Gbps
Operating Temperature	-40°C to 65°C (-40°F to 149°F)
MTBF	200, 000 hours
Supported Protocols	IPv4, IPv6, MPLS, L2VPN, L3VPN
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, T1/E1