Cisco ASR 903 Router Design and Deployment Guide▄
RingName Inst NodeType NodeState Port0 Port1
--------------------------------------------------------------------------------
g8032_ring 1 Owner Idle R,B
ASR903-R1# show ethernet ring g8032 configuration
Ethernet ring g8032_ring
Port0: GigabitEthernet0/2/1 (Monitor: GigabitEthernet0/2/1)
Port1: GigabitEthernet0/2/0 (Monitor: GigabitEthernet0/2/0)
Exclusion-list VLAN IDs:
Open-ring: no
Instance 1
Description:
Profile: g8032_profile
RPL: port0 RPL Owner
Inclusion-list VLAN IDs: 10,1000-2999
APS channel
Level: 7
Port0: Service Instance 1
Port1: Service Instance 1
State: configuration resolved
ASR903-R1# show ethernet ring g8032 port status
Port: GigabitEthernet0/2/0
Ring: g8032_ring
Block vlan list:
Unblock vlan list: 10,1000-2999
REQ/ACK: 2/2
Instance 1 is in Unblocked state
Port: GigabitEthernet0/2/1
Ring: g8032_ring
Block vlan list: 10,1000-2999
Unblock vlan list:
REQ/ACK: 1/1
Instance 1 is in Blocked state
ASR903-R1# show ethernet ring g8032 profile
Ethernet ring profile name: g8032_profile
WTR interval: 1 minutes
Guard interval: 500 milliseconds
HoldOffTimer: 0 seconds
Revertive mode
ASR903-R1# show ethernet ring g8032 status
Ethernet ring g8032_ring instance 1 is RPL Owner node in Idle State
To Next Page
Loading...
