Cisco ASR 920 series

Figure 8: Installing the Cable Guides (As Per the Standard Kit)
Wall Mounting the Router
To install the router on a wall, follow the instructions in these procedures:
Attaching the Brackets to the Router for Wall-Mounting
While wall mounting the router, always ensure that the power supplies are at the top position.
Note
The following figure shows how to attach a 19-inch bracket to one side of the router. Follow the same steps
to attach the second bracket to the opposite side.
Installing the Cisco ASR 920 Series Router
10
Installing the Cisco ASR 920 Series Router
Wall Mounting the Router