Cisco CALNET 3 Administration Guide

• Opting in to and out of pools by assistants
• Joining ongoing calls by assistants
• Transferring ongoing calls to themselves by assistants
All of the service activation codes for the feature are set up by default.
You can change the service activation codes for specific functions according to your organization's requirement.
See Vertical Service Activation Codes, on page 298 for details.
If you change a service activation code through the phone website, make sure to update the corresponding
setting in BroadWorks, and vice versa.
Important
Executive-Assistant Service Activation Codes in the XML Configuration File
If you change a service activation code in the XML Configuration file, make sure to update the corresponding
setting in BroadWorks.
Important
The following sample XML Configuration file section shows the parameters (XML tags) and values for the
executive-assistant feature service activation codes.
<!-- Vertical Service Activation Codes -->
<Exec_Assistant_Call_Initiate_Code ua="na">#64</Exec_Assistant_Call_Initiate_Code>
<Exec_Call_Filter_Act_Code ua="na">#61</Exec_Call_Filter_Act_Code>
<Exec_Call_Filter_Deact_Code ua="na">#62</Exec_Call_Filter_Deact_Code>
<Exec_Assistant_Call_Push_Code ua="na">#63</Exec_Assistant_Call_Push_Code>
<Exec_Call_Retrieve_Code ua="na">*11</Exec_Call_Retrieve_Code>
<Exec_Call_Bridge_Code ua="na">*15</Exec_Call_Bridge_Code>
The following table describes these parameters and values.
DescriptionValueParameter
For assistants to initiate calls on
behalf of executives
The # or * code that you want to be
used for the function
Exec_Assistant_Call_Initiate_Code
For executives to activate call
filtering
The # or * code that you want to be
used for the function
Exec_Call_Filter_Act_Code
For executives to deactivate call
filtering
The # or * code that you want to be
used for the function
Exec_Call_Filter_Deact_Code
For assistants to transfer an ongoing
call to an executive
The # or * code that you want to be
used for the function
Exec_Assistant_Call_Push_Code
For executives or assistants to join
an ongoing call
The # or * code that you want to be
used for the function
Exec_Call_Bridge_Code
For executives or assistants to
transfer an ongoing call to
themselves
The # or * code that you want to be
used for the function
Exec_Call_Retrieve_Code
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
232
Cisco IP Phone Administration
Service Activation Codes for Executives and Assistants

Cisco CALNET 3 Specifications

General

Brand	Cisco
Model	CALNET 3
Category	IP Phone
Language	English