Cisco CALNET 3 Administration Guide

DescriptionParameter
Displays the primary NTP server assigned to the
phone.
Primary NTP Server
Displays the secondary NTP server assigned to the
phone.
Secondary NTP Server
Indicates if the phone has Bluetooth enabled to it.Bluetooth Enabled
Indicates if the phone has Bluetooth is connected to
it.
Bluetooth Connected
Displays the MAC address of the Bluetooth device.Bluetooth MAC
Displays the ID of the connected device.Connected Device ID
Displays if the phone uses Ethernet cable as the
deployment option.
Only for Cisco IP Phone 8861.
Active Interface
Displays MAC address of the phone.
Only for Cisco IP Phone 8861.
Wireless MAC
Displays the SSID of the phone.
Only for Cisco IP Phone 8861.
SSID
Displays if the phone uses 802.11 interface as the
deployment option.
Only for Cisco IP Phone 8861.
Mode 802.11
Displays the type of authentication that the phone uses
to access the WLAN.
Security Mode
Displays the state of the shutter.
Only for Cisco IP Phone 8845 and 8865.
Camera Shutter
IPv4 Information
DescriptionParameter
Indicates that the connection is established.IP Status
Indicates the type of internet connection for the phone:
• DHCP
• Static IP
Connection Type
Displays the current IP address assigned to the IP
phone.
Current IP
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
248
Cisco IP Phone Troubleshooting
IPv4 Information

Cisco CALNET 3 Specifications

General

Brand	Cisco
Model	CALNET 3
Category	IP Phone
Language	English