DescriptionParameter
Sets the default volume for the headset.
Default: 10
Headset Volume
Sets the default volume for the Bluetooth device.Bluetooth Volume
Enables or disables the Electronic HookSwitch (EHS)
feature.
After EHS is enabled, the AUX port does not output
phone logs.
Electronic Hookswitch Control
Screen
DescriptionParameter
Enables a screen saver on the phone. When the phone
is idle for a specified time, it enters screen saver mode.
Default: No
Screen Saver Enable
Amount of idle time before screen saver displays.
enter the number of seconds of idle time to elapse
before the screen saver starts.
Default: 300
Screen Saver Wait
Types of screen saver. Options you can choose:
• Clock: Displays a rounded clock with the
wallpaper in the background.
• Clock: Displays a digital clock on a plain
background.
• Download Picture: Displays a picture pushed
from the phone webpage.
• Logo: Enables to add logo as phone background.
• Lock : Enables locking of the screensaver.
Screen Saver Type
Number of seconds before the screen saver should
refresh (if, for example, you chose a rotation of
pictures).
Screen Saver Refresh Period
Number of seconds for which the back light timer will
be on.
Back Light Timer
Value for desired brightness.Display Brightness
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
338
Cisco IP Phone Troubleshooting
Screen