Cisco CALNET 3 Administration Guide

DescriptionParameter
Controls whether the phone uses its line keys to
monitor the BLF list, when monitoring of the BLF
list is active.
When set to No, the phone uses only the Key
Expansion Module keys to monitor the BLF list.
This setting only has significance when BLF List is
set to Show.
Default: No
Example XML configuration:
<Use_Line_Keys_For_BLF_List
ua="na">Yes</Use_Line_Keys_For_BLF_List>
Use Line Keys For BLF List
Features that users are allowed to configure on line
keys.
To allow a feature, add the corresponding option as
shown below. Separate options with the semi-colon
(;).
• Speed dial: sd
• Busy Lamp Field (BLF) key to monitor a user:
blf
• Call pickup from a monitored line: cp
This option is only effective when the
blf option is added.
Note
Default: sd;
Adding the sd option automatically allows
users to configure speed dial to a monitored
line (speed dial with BLF) when the blf
option is added.
Note
Example, to allow all features:
sd;blf;cp
Example XML configuration:
<Customizable_PLK_options
ua="na">sd;</Customizable_PLK_options>
Customizable PLK Options
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
342
Cisco IP Phone Troubleshooting
General

Cisco CALNET 3 Specifications

General

Brand	Cisco
Model	CALNET 3
Category	IP Phone
Language	English