Cisco Catalyst 2960-X - Page 48

You can verify your setting by entering the show running-config privileged EXEC or show etherchannel
channel-group-number detail privileged EXEC command.
Related Commands
DescriptionCommand
Assigns an Ethernet port to an EtherChannel group, or enables an
EtherChannel mode, or both.
channel-group
Displays EtherChannel information for a channel.
show etherchannel
Catalyst 2960-X Switch Layer 2 Command Reference, Cisco IOS Release 15.0(2)EX
42 OL-29043 -01
Layer 2 Commands
interface port-channel