Cisco Catalyst 2960-X - Show Platform Backup Interface

show platform backup interface
To display platform-dependent backup information used in a Flex Links configuration, use the show platform
backup interface privileged EXEC command.
show platform backup interface [interface-id | dummyQ]
Syntax Description
(Optional) Backup information for all interfaces or the specified interface. The
interface can be a physical interface or a port channel.
interface-id
(Optional) Displays dummy queue information.dummyQ
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS 15.0(2)EX
Usage Guidelines
Use this command only when you are working directly with a technical support representative while
troubleshooting a problem. Do not use this command unless a technical support representative asks you to do
so.
Catalyst 2960-X Switch Layer 2 Command Reference, Cisco IOS Release 15.0(2)EX
66 OL-29043 -01
Layer 2 Commands
show platform backup interface