Cisco Catalyst 2960-X - Show Platform Pm

show platform pm
To display platform-dependent port manager information, use the show platform pm command in privileged
EXEC mode.
show platform pm {counters| group-masks| idbs {active-idbs| deleted-idbs}| if-numbers| link-status|
module-info| platform-block| port-info interface-id| stack-view| vlan {info| line-state}}
Syntax Description
Displays module counters
information.
counters
Displays EtherChannel group
masks information.
group-masks
Displays interface data block (IDB)
information. The keywords have
these meanings:
• active-idbs—Displays active
IDB information.
• deleted-idbs—Displays
deleted and leaked IDB
information.
idbs {active-idbs | deleted-idbs}
Displays interface numbers
information.
if-numbers
Displays local port link status
information.
link-status
Displays module status
information.
module-info
Displays platform port block
information.
platform-block
Displays port administrative and
operation fields for the specified
interface.
port-info interface-id
Displays status information for the
stack.
This keyword is not supported in
the LAN Lite image.
stack-view
Catalyst 2960-X Switch Layer 2 Command Reference, Cisco IOS Release 15.0(2)EX
68 OL-29043 -01
Layer 2 Commands
show platform pm