Name: Cisco Catalyst 3650
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Switch Stack Update

Performing the Stack Update

Best Practice User Guide for the Catalyst 3850 and Catalyst 3650 Switch Series

• Obtain the Switch Software Image

• Check the Software Version on the Stack Members

• Configure the Switch to Run in Install Mode

• Installing IOS image from local TFTP/FTP server

• Update the Switch Stack Image

•

Note The following tasks are to be performed in a sequence that is listed here.

Obtain the Switch Software Image

We recommend that you review the appropriate switch release notes before installation to ensure

compatibility with your network topology. Each platform on Cisco.com has a Cisco-suggested release

based on software quality, stability, and longevity, which is designated by the symbol, as displayed

in Appendix 2, “Cisco Catalyst 3850-48P-S Switch”

Step 1 Download the desired .bin file from Cisco.com to the switch flash storage.

Note The purpose of this example is only to show you how the Cisco-suggested release symbol is designated,

and not to give you recommended release versions because those change over time.

Figure 2 Cisco Catalyst 3850-48P-S Switch

Check the Software Version on the Stack Members

Step 2 Verify the running software version.

Configure the Switch to Run in Install Mode

Your switches should run in install mode while in production. This mode is not a requirement, but the

update procedure is different if your switches are running in a mode other than install mode.

Other manuals for Cisco Catalyst 3650

Questions and Answers:

Need help?

Do you have a question about the Cisco Catalyst 3650 and is the answer not in the manual?

General