Cisco Catalyst 3650 Command Reference

clear spanning-tree counters
To clear the spanning-tree counters, use the clear spanning-tree counters command in privileged EXEC
mode.
clear spanning-tree counters [interface interface-id]
Syntax Description
(Optional) Clears all spanning-tree counters on the specified
interface. Valid interfaces include physical ports, VLANs, and port
channels.
The VLAN range is 1 to 4094.
interface interface-id
Command Default
None
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Usage Guidelines
If the interface-id value is not specified, spanning-tree counters are cleared for all interfaces.
Examples
This example shows how to clear spanning-tree counters for all interfaces:
Switch# clear spanning-tree counters
Related Commands
DescriptionCommand
Restarts the protocol migration process on the interface.
clear spanning-tree detected-protocols
Enables debugging of spanning-tree activities.
debug spanning-tree
Layer 2/3 Command Reference, Cisco IOS XE Release 3.6E (Catalyst 3650 Switch)
26 OL-32639-01
Layer 2/3 Commands
clear spanning-tree counters

Cisco Catalyst 3650 Specifications

General

Switching Capacity	160 Gbps
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Device Type	Switch
Form Factor	Rack-mountable
Layer	Layer 3
DRAM	4 GB
Flash Memory	4 GB
Operating System	Cisco IOS XE
Model	Catalyst 3650
Ports	24 or 48 10/100/1000 Ethernet ports
Stacking	Yes
Power over Ethernet (PoE)	Yes
Power Supply Options	350W AC
VLANs	4094