Cisco Catalyst 3650 - Default IGMP Configuration

Command Default
The default is src-mac.
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Usage Guidelines
You can verify your setting by entering the show running-config privileged EXEC command or the show
etherchannel load-balance privileged EXEC command.
Examples
This example shows how to set the load-distribution method to dst-mac:
Switch(config)# port-channel load-balance dst-mac
Layer 2/3 Command Reference, Cisco IOS XE Release 3.6E (Catalyst 3650 Switch)
OL-32639-01 51
Layer 2/3 Commands
port-channel load-balance