Cisco Catalyst 3650 - Page 77

Examples
This example shows how to cause an interface to cease operating as a Layer 2 port and become a Cisco-routed
port:
Switch(config-if)# no switchport
This example shows how to cause the port interface to cease operating as a Cisco-routed port and convert to
a Layer 2 switched interface:
Switch(config-if)# switchport
Layer 2/3 Command Reference, Cisco IOS XE Release 3.6E (Catalyst 3650 Switch)
OL-32639-01 73
Layer 2/3 Commands
switchport