Cisco Catalyst 3850 User Manual

Grounding the Switch 76
Installing the DC Power Supply in the Switch 78
Wiring the DC Input Power Source 79
Finding the Power Supply Module Serial Number 80
Installing the Fan 83
CHAPTER 5
Fan Module Overview 83
Installation Guidelines 84
Installing a Fan Module 85
Finding the Fan Module Serial Number 86
Configuring the Switch 87
CHAPTER 6
Configuring the Switch Using the Web User Interface 87
Setting up the Switch 87
Connecting to the Switch 87
Creating User Accounts 88
Choosing Setup Options 90
Configuring Basic Device Settings 90
Configuring Your Device Based on a Site Profile 92
Configuring Switch Wide Settings 101
Configuring VLAN Settings 101
Configure STP Settings 102
Configuring DHCP, NTP, DNS and SNMP Settings 103
Configuring Port Settings 105
Configuring the Switch Using the CLI 107
Accessing the CLI Through the Console Port 107
Connecting the RJ-45 Console Port 108
Connecting the USB Console Port 108
Installing the Cisco Microsoft Windows USB Device Driver 111
Installing the Cisco Microsoft Windows XP USB Driver 111
Installing the Cisco Microsoft Windows 2000 USB Driver 111
Installing the Cisco Microsoft Windows Vista and Windows 7 USB Driver 112
Uninstalling the Cisco Microsoft Windows USB Driver 112
Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver 112
Catalyst 3850 Switch Hardware Installation Guide
vOL-26779-05
Contents

Cisco Catalyst 3850 Specifications

General

Stacking Bandwidth	480 Gbps
Max Stacking Units	9
Form Factor	Rack-mountable
RAM	4 GB
Flash Memory	4 GB
Operating System	Cisco IOS XE
Model	Catalyst 3850
Ports	24 or 48 Gigabit Ethernet ports
Uplink Interfaces	4 x 1GE, 2 x 10GE, or 4 x 10GE
Power Supply	Redundant power supplies
Dimensions	44.5 x 44.8 x 4.45 cm
Weight	7.6 kg
Features	IPv6
Power over Ethernet (PoE)	PoE, PoE+, UPOE (varies by model)
Operating Temperature	0 to 40°C