Cisco Catalyst 9600 Series User Manual

Weight Specifications
The total weight of a fully configured chassis will depend on the type of chassis, the number of modules, and
power supplies installed. Use the corresponding weights in the tables below to arrive at the total chassis weight
for your hardware configuration.
Chassis Weights
Weight (Chassis without Fan Tray and Power Supply
Units)
PID (add = for spare)
55.90 lb (25.36 kg)C9606R
Supervisor Module Weight
WeightPID (add = for spare)
12.02 lb (5.45 kg)C9600-SUP-1
Line Card Weights
WeightPID (add = for spare)
7.83 lb (3.55 kg)C9600-LC-48YL
7.67 lb (3.48 kg)C9600-LC-24C
Power Supply Module Weights
WeightPID (add = for spare)
2.65 lb (1.2 kg)C9600-PWR-2KWAC
2.82 lb (1.28 kg)C9600-PWR-2KWDC
Blank Covers
WeightPID (add = for spare)
2.87 lb (1.3 kg)C9606-SLOT-BLANK
(Cisco Catalyst 9600 Series Blank for Chassis Module
Slot)
0.18 lb (0.08 kg)C9606-PWR-BLANK
(Cisco Catalyst 9600 Series Blank for Chassis Power
Supply Slot)
Cisco Catalyst 9600 Series Switches Hardware Installation Guide
96
Technical Specifications
Weight Specifications

Cisco Catalyst 9600 Series Specifications

General

Series	Catalyst 9600 Series
Category	Switch
Switching Capacity	Up to 25.6 Tbps
Software	Cisco IOS XE
Form Factor	Modular chassis
Purpose	Enterprise campus core and distribution
Ports	10G, 25G, 40G, 100G, 400G
Redundancy	Yes, supports redundant power supplies and fans
Stacking	Virtual Stacking supported
Security	Advanced security features including MACsec encryption
Management	Cisco DNA Center, CLI, SNMP
Uplink Ports	40G, 100G
Power Supply	Redundant, hot-swappable
Operating Temperature	0°C to 45°C (32°F to 113°F)
Port Density	Up to 384 ports
Weight	Starting at 75 lbs (34 kg)
Modular Slots	Up to 6 line card slots