Cisco Catalyst 9600 Series - DC Power Supply Module

• Supports redundant and combined configuration modes. A single (non-redundant) or a dual (redundant)
power supply configuration, can support the following loads:
Output Power in WattsInput Voltage (VAC)
2000W220VAC
1050W110VAC
DC Power Supply Module
Figure 5: Cisco Catalyst 9600 Series 2000W DC Power Supply
LED4PSU fan1
Power cord connector5Release handle2
--Release latch3
The following are the features supported by a Cisco Catalyst 9600 Series DC power supply module:
Cisco Catalyst 9600 Series Switches Hardware Installation Guide
8
Product Overview
DC Power Supply Module